Treadmill Speed Chart: MPH, KPH and Pace at a Glance
A treadmill speed chart that converts mph to kph and pace per mile or kilometre, plus what each speed band feels like and how incline shifts the numbers.
On this page
A treadmill speed chart answers the question you ask at the console every session: what does this number on the screen actually mean? Most home machines show speed in mph or km/h, while your plan, your watch or your friend talks in minutes per mile or per kilometre. The tables below cover both console types, from a slow warm-up walk to a 10 mph run, and the sections after them explain how to use those numbers once the belt is moving. If you track your workouts by step count rather than speed or time, our guide to how long 10,000 steps takes on a treadmill translates that metric to the numbers on your console.
The mph Chart, With kph and Both Paces
If your console reads in miles per hour, start here. Pace per mile is simply 60 divided by the speed, so 1.0 mph is a 60:00 mile and 10.0 mph is a 6:00 mile, the same anchors used in UREVO’s speed-to-pace chart. The kph column multiplies by 1.609, which gives the same values SOLE Fitness lists for its walking range: 2.0 mph is 3.22 kph, 3.0 mph is 4.83 kph and 4.0 mph is 6.44 kph.
| mph | kph | Pace per mile | Pace per km |
|---|---|---|---|
| 1.0 | 1.61 | 60:00 | 37:17 |
| 2.0 | 3.22 | 30:00 | 18:38 |
| 2.5 | 4.02 | 24:00 | 14:55 |
| 3.0 | 4.83 | 20:00 | 12:26 |
| 3.5 | 5.63 | 17:09 | 10:39 |
| 4.0 | 6.44 | 15:00 | 9:19 |
| 4.5 | 7.24 | 13:20 | 8:17 |
| 5.0 | 8.05 | 12:00 | 7:27 |
| 5.5 | 8.85 | 10:55 | 6:47 |
| 6.0 | 9.66 | 10:00 | 6:13 |
| 6.5 | 10.46 | 9:14 | 5:44 |
| 7.0 | 11.27 | 8:34 | 5:20 |
| 7.5 | 12.07 | 8:00 | 4:58 |
| 8.0 | 12.87 | 7:30 | 4:40 |
| 8.5 | 13.68 | 7:04 | 4:23 |
| 9.0 | 14.48 | 6:40 | 4:09 |
| 9.5 | 15.29 | 6:19 | 3:55 |
| 10.0 | 16.09 | 6:00 | 3:44 |
Half-mph steps are enough for planning. On the belt, most consoles move in 0.1 mph increments, and each 0.1 mph in the running range changes your mile pace by roughly 5 to 10 seconds. The jump from 6.0 to 6.1 mph takes about 10 seconds off a mile; from 9.0 to 9.1 mph it is closer to 4 seconds.
Reading It the Other Way: a kph-First Table
Machines sold outside the US usually default to km/h. Here pace per kilometre is 60 divided by the speed, so whole numbers on the console give tidy splits: 10 km/h is a 6:00 kilometre, 12 km/h is a 5:00 kilometre, 15 km/h is a 4:00 kilometre.
| kph | mph | Pace per km | Pace per mile |
|---|---|---|---|
| 3 | 1.86 | 20:00 | 32:11 |
| 4 | 2.49 | 15:00 | 24:08 |
| 5 | 3.11 | 12:00 | 19:19 |
| 6 | 3.73 | 10:00 | 16:06 |
| 7 | 4.35 | 8:34 | 13:48 |
| 8 | 4.97 | 7:30 | 12:04 |
| 9 | 5.59 | 6:40 | 10:44 |
| 10 | 6.21 | 6:00 | 9:39 |
| 11 | 6.84 | 5:27 | 8:47 |
| 12 | 7.46 | 5:00 | 8:03 |
| 13 | 8.08 | 4:37 | 7:26 |
| 14 | 8.70 | 4:17 | 6:54 |
| 15 | 9.32 | 4:00 | 6:26 |
| 16 | 9.94 | 3:45 | 6:02 |
If you need splits for a specific race distance or a speed that falls between rows, our treadmill pace chart goes deeper on race splits, and the pace and speed calculator handles any single conversion in one step.
Many consoles let you switch between mph and km/h through a settings or maintenance menu, often by holding two keys at power-on. The key combination varies by brand, so check the manual rather than pressing buttons at random mid-workout.
What Each Speed Band Feels Like
Numbers on a chart are abstract until you connect them to how your legs and breathing respond. These bands are a coach’s rough guide for an adult of average height on a flat belt. Taller people with a longer stride will sit lower in each band, and shorter people higher.
- 1.0 to 2.0 mph (1.6 to 3.2 km/h): strolling. Useful for under-desk walking, recovery after intervals, or the first two minutes of a warm-up.
- 2.5 to 3.5 mph (4.0 to 5.6 km/h): purposeful walking. SOLE Fitness names 2.5 to 3.5 mph as a good starting range for beginner walkers, and it is where most people can hold a conversation for 30 to 60 minutes.
- 3.6 to 4.3 mph (5.8 to 6.9 km/h): power walking. Arms drive harder and the stride gets choppy near the top of the band.
- 4.3 to 5.0 mph (6.9 to 8.0 km/h): the transition zone. Walking starts to feel forced and a slow jog feels more natural. This is the band to skip through quickly rather than sit in.
- 4.5 to 6.0 mph (7.2 to 9.7 km/h): easy jogging. SOLE suggests 4.5 to 5.0 mph as the starting point for beginners whose goal is jogging.
- 6.0 to 8.0 mph (9.7 to 12.9 km/h): steady running for most recreational runners, from comfortable aerobic work up to tempo effort.
- 8.0 mph and above (12.9 km/h+): threshold, interval and race-pace work for trained runners.
Speed alone does not tell you how hard you are working. Two people at 3.5 mph can be at very different efforts. Heart rate gives you a second reading: for moderate-intensity exercise, the target range is 50% to 70% of maximum heart rate, according to MedlinePlus and the American Heart Association. Find the speed on the chart that puts you in that range and you have your own personal “moderate” row.
How Incline Changes What the Chart Means
The tables above assume a flat belt. Add incline and the same speed costs more effort, because you are lifting your body up the grade with every step. Walking at 3.0 mph on a 6% grade will feel harder than walking at 3.5 mph flat, and it shifts more of the work to the glutes and hamstrings.
Speed-incline conversion charts try to put a flat-ground equivalent on these combinations. Treat them with some caution at steep grades: a 2022 validation study published in PubMed Central found one such chart accurate at 0% to 4% incline. Beyond that range, use the conversion as a rough starting point and let breathing and heart rate decide.
A practical way to combine both:
- Pick your flat walking speed from the chart, for example 3.2 mph.
- Keep that speed and raise the incline by 1% every 2 minutes.
- Stop climbing when you reach the top of the moderate range, or when you need the handrails to keep up.
- Note that speed and incline pair as your incline baseline for the next sessions.
For more ways to structure hill work, the guide to treadmills with incline covers grade ranges and session formats in detail.
Turning the Chart Into a Workout
A chart is most useful when it sits behind a plan. Three formats that use the numbers directly:
Steady walk, 30 minutes. 5 minutes at 2.5 mph, 20 minutes at your chosen walking speed between 3.0 and 3.8 mph, 5 minutes back down at 2.5 mph. Each week, add 0.1 to 0.2 mph to the middle block if your heart rate stays in the moderate range.
Walk-jog ladder, 28 minutes. Warm up for 5 minutes at 3.0 mph. Then alternate 2 minutes of easy jogging at 4.8 to 5.2 mph with 2 minutes of walking at 3.2 mph, five times. Cool down for 3 minutes at 2.5 mph. When the jog sections feel easy, extend them to 3 minutes and shorten the walks to 1.
Pace-target run. Pick a goal mile pace, find the matching speed on the chart, and run 3 to 5 blocks of 5 minutes at that speed with 2 minutes of easy jogging between them. A 9:00 mile goal means 6.7 mph; a 5:30 per km goal means about 10.9 km/h.
Changing speed by hand every two minutes gets tedious, especially on consoles where the keys sit in awkward places. Treadmill Pro lets you change speed and incline from your iPhone over Bluetooth on supported machines and records the session to Apple Health, so the speeds you actually ran end up next to your heart rate data instead of in your memory.
Common Questions About Treadmill Speeds
Is 3 mph a fast walk? For most adults it is a moderate, purposeful walk rather than a fast one. It equals a 20:00 mile or a 12:26 kilometre. A brisk walk sits closer to 3.5 to 4.0 mph.
Why does my watch show a different pace from the chart? Wrist-based pace on a treadmill is estimated from arm swing and cadence, not measured from the belt. Belt calibration also drifts with wear. If the gap is consistent, trust the console for pacing and the watch for heart rate.
Can I use the chart for an under-desk treadmill? Yes, but those machines often top out between 2.5 and 4.0 mph, so you will only use the first few rows. Our roundup of under-desk treadmills lists the speed ranges you can expect.
Should I round speeds to whole numbers? For walking, half-mph steps are fine. For running to a pace target, use the 0.1 mph increments: the difference between 6.5 and 7.0 mph is 40 seconds per mile, which is a full training zone for many runners.
Next Steps
Find the row in the first or second table that matches your console’s units and your current walking or running speed, then write down the three speeds you use most: warm-up, main effort and recovery. Check those against your heart rate over the next two or three sessions and adjust by 0.1 to 0.2 mph until the moderate session actually lands in the 50% to 70% range. After that, add incline before you add speed, and move up one row on the chart only when the current one feels easy for the full session.
Related articles
Treadmill Speed to Pace: Convert MPH to Minutes per Mile
Treadmill speed to pace in one division: how to turn mph into minutes per mile, avoid the decimal trap, and set the belt for any target pace you train at.
Treadmill Pace Chart: Speed, Time and Mile Splits
A treadmill pace chart turns km/h and mph into per-mile and per-kilometre splits, so you can set the belt to the exact pace your training plan asks for.
Does Walking on a Treadmill Help You Lose Weight?
Does walking on a treadmill help you lose weight? Yes, when weekly minutes are high enough and food shifts a little. Speeds, inclines and a 6-week plan inside.
🏃
Ready to take control of your run?
Connect Treadmill Pro to your treadmill and track every stat - right from your iPhone.
Free · iPhone, iPad & Android