REMOTE CONTROL
Start, stop and change speed in one tap
Big buttons you can hit mid-stride, speed steps of 0.1 km/h and a hold-to-stop guard so a stray tap never stops the belt.
Use the same account as in the app. Your Pro plan follows you to every device.
Your plan is active on every device. Manage it in your account.
Treadmill Pro turns your iPhone or Android into a remote for WalkingPad, Kingsmith, Sperax and Urevo walking pads. Start, stop and change speed over Bluetooth, then keep every walk in your history.
HOW TO CONNECT
No pairing in iOS settings and no account. The app finds the pad on its own.
Plug it in, press power and close the brand app if it is open. One app can hold the Bluetooth link at a time.
Open Treadmill Pro and tap Connect. Your WalkingPad shows up by name, usually within ten seconds.
Start, pause and change speed from the phone. Time, distance and steps count as you go.
COMPATIBLE MODELS
Treadmill Pro talks to the pad over the same Bluetooth channel the brand app uses. If your pad shows up in the KS Fit app, it will show up in ours, usually within a few seconds of switching it on.
Folds in half and slides under a sofa. Speed up to 6 km/h, start and stop from the phone, live steps and distance.
Speed · Start/stop · Stats
The quiet one for small flats. Full speed control from the app, plus a session history that the stock app does not keep.
Speed · Start/stop · Stats
Rail up, it runs to 10 km/h. Treadmill Pro switches modes, sets pace targets and logs every run with heart rate zones.
Speed · Start/stop · Stats
Foldable runner with a handrail. Interval programs push speed changes to the belt for you, no buttons on the rail needed.
Speed · Start/stop · Stats
Made for standing desks. Set a steady walking pace once, then leave the phone on the desk and keep working.
Speed · Start/stop · Stats
Double-fold runner with a console. The app mirrors the console and adds programs, goals and Apple Health sync.
Speed · Start/stop · Stats
Most Bluetooth pads sold since 2020 use the same protocol. Open the app, tap Scan and send us the name it shows. We add new models every month.
APP FEATURES
The stock app gives you a speed slider. Treadmill Pro adds interval programs, heart rate zones and a proper workout history, and it keeps working when the screen is off.
REMOTE CONTROL
Big buttons you can hit mid-stride, speed steps of 0.1 km/h and a hold-to-stop guard so a stray tap never stops the belt.
INTERVAL PROGRAMS
Pick a ready plan or build your own. The app shifts between walk and brisk blocks on its own and tells you what comes next.
HEART RATE ZONES
Pair Apple Watch or a chest strap and watch time in each zone fill up live. Handy if your goal is a steady zone 2 walk.
APPLE HEALTH SYNC
Steps, distance, active calories and heart rate save as a workout automatically, so your rings close and your history stays in one place.
FAQ
Short answers about pairing, models, data and price. If your question is not here, write to support from the app and a real person answers within a day.
It works with WalkingPad A1, C1, C2, R1, R2, P1 and the newer Z1 and X21 models. If your pad pairs with the KS Fit app over Bluetooth, it almost always pairs with ours too.
No. Treadmill Pro talks to the pad directly over Bluetooth. You can delete the stock app, or keep both and switch between them.
Turn the pad on, open the app and tap Connect. The pad shows up in the list within a few seconds. No account, code or Wi-Fi is needed.
Yes. Start, stop and speed buttons react in under a second, and the big plus and minus keys are easy to hit while you walk.
Each walk is saved with steps, distance, time and calories. Heart rate from an Apple Watch or a chest strap is added to the same record.
That is one of the main reasons people install it. The phone fully replaces the remote, including the manual and automatic modes.
The remote, live stats and history are free. Programs, heart rate zones and long term charts are part of Pro, with a free trial first.
Tap Connect anyway. If the pad is found, it will most likely work. If not, send us the model name from the sticker under the deck and we will add it.
FREE TO START
Install Treadmill Pro, turn the pad on and tap Connect. Your first walk starts in under a minute, and every step lands in Apple Health or Health Connect.
Bluetooth FTMS · iOS and Android · no account needed
How likely are you
to recommend us to a friend?
How did you first hear about us?
What is your main goal with your treadmill?
What feature would make Treadmill Pro better for your workouts?
Thank you!
Your feedback helps us make Treadmill Pro better.